Gucci Bangle Watch

Servicing my mother’s watch

This watch belongs to my mother; it was a gift from my father many years back- a Christmas gift I believe, although I may be mistaken. She delivered me the watch along with a few others for replacement batteries. Sadly, I didn’t have the needed power cell on hand and had to place an order for it. Instead of twiddling my thumbs while I waited for  the delivery I decided to give the watch a good clean. Continue reading “Gucci Bangle Watch”

Navitimer 806 Restoration: Part 3

Conclusion of the Navitimer project

This is the final chapter of the Breitling Navitimer Restoration Project which began in 2016.  As you’ll recall I had serviced the movement and repaired the damaged case; I had also repaired the hour and minute hands which were bent and needed new luminous paint.

At this point the biggest need was securing a replacement bezel. These old Navitimers have a notched bezel which is friction fit to a brass ring on the case. The ring is held in place with a spring and both these parts are hidden under the slide rule running the circumference of the dial. My bezel was long gone but I still had the brass ring (damaged) and the spring. Continue reading “Navitimer 806 Restoration: Part 3”

Time to Clean House

Selling old watches and parts

Well, it’s been quite a while since I’ve posted and that’s because I’ve been mulling a whole new approach to this watchmaking hobby of mine.

It started out simply enough- get myself an Omega Speedmaster cheap, but it ballooned into a job that has frankly caused me more anxiety that glee.  I’ve accumulated so many rubbish watches and watch movements that I don’t really know what to do with them all. I’d buy one to fix and another for parts, then think to myself, “You know, I’ll bet you could fix both of these…” and well there you go. Continue reading “Time to Clean House”

Navitimer 806 Restoration: Part Two

Continuation of the Navitimer project

Having finished the service of the Navitimer movement I needed to find a stainless steel case to house it, so I began scouring the internet for one of the right vintage. I deduced that the movement was from the late 1960’s from the flat hairspring, beat corrector, and general finishing so I was on the lookout for a case with a serial number in the 1130000 – 1350000 range (which would place production between 1967 and 1970). As luck would have it the first one available happened to fall right within range. Continue reading “Navitimer 806 Restoration: Part Two”

Navitimer 806 Restoration: Part One

A 1967 Breitling restoration project

In October of 2016 I purchased a second vintage Breitling Navitimer which I knew would be a long term project. The watch consisted of only a Venus 178 movement, dial, slide rule, and hand set. I would need to service the movement and find a case and strap for it before the project was complete. I’ve continued working on this project off and on now for a little over a year and although it’s not yet complete, I have enough documented to put up a blog post or two detailing the journey thus far. Continue reading “Navitimer 806 Restoration: Part One”

Kerr-McGee Accutron 2181

Service of a 1975 Bulova Accutron

Here is yet another Bulova Accutron 2181. This one came to me as a toss-in with a second Railroad Grade Accutron I purchased for restoration. The dial is customized featuring the Kerr-McGee logo and on the caseback is the engraving “Presented to Willard Lane 25 years of service 1976 Kerr-McGee”. I don’t know much about Kerr-McGee outside of the Silkwood incident so I’ll refrain from opining. Continue reading “Kerr-McGee Accutron 2181”

A Second Francis Barker Mk III Compass

Restoration of a 1943 CKC Mk III compass

Well, here we have another Francis Barker Mk III prismatic compass. I hadn’t intended to service another of these as parts are difficult to find and proper disposal of radium paint can be problematic, but with the holidays fast approaching I wanted something exceptional to gift my nephew and a prismatic compass fit the bill. Continue reading “A Second Francis Barker Mk III Compass”

Ernest Borel Valjoux 23 Movement

Resurrection of a dead chronograph movement

This post pertains to a Valjoux 23 chronograph movement which was received in the same freezer bag from China as the Universal Genève Uni-Compax I recently serviced. The bag contained multiple chronograph movements which were all in bad shape. I actually received two Valjoux 23 movements, but this one had a working balance and Incabloc shock protection thus making it the better candidate for restoration. Continue reading “Ernest Borel Valjoux 23 Movement”

Universal Genève Uni-Compax

Service of a Martel chronograph movement

Here is what I consider to be a very special piece even though it’s missing some of its most important bits. This is a Universal Genève Uni-Compax chronograph from around 1942. The movement was most probably fitted in a solid gold case which at some point went to the smelter and may not be replaceable. Regardless, I was excited to get my hands on the piece because it’s a chronograph movement I’ve not worked on before. Continue reading “Universal Genève Uni-Compax”

Seiko Diver’s Watch

Restoration of a Seiko 7002-7000 for Christmas

Here is a heavily used Seiko 7002-7000 diver’s watch which I picked up from a seller in the Philippines in non-working condition. I wanted to do something a bit special for the men in my family this holiday and since Seiko watches generally offer the most value, a 7002 diver seemed just the thing. Continue reading “Seiko Diver’s Watch”